dbx 30 Series Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Ecualizador estéreo dbx 30 Series. dbx 30 Series 20 páginas. Graphic equalizers
Imprimir página
REAR PANEL DESCRIPTIONS
P
C
R
OWER
ORD
ECEPTACLE
I
C
:
NPUT
ONNECTORS
locking XLR type connectors, 1/4-inch tip-ring-sleeve phone jack connectors, and a barrier strip.
The maximum input level that the equalizer can accept is +22dBu (ref: 0.775Vms).
O
C
UTPUT
ONNECTORS
XLR type connectors, 1/4 inch tip-ring-sleeve phone jack connectors and a barrier strip.
I
G
L
S
NPUT
ROUND
IFT
grounding system. This is sometimes helpful in preventing electronic "hum" in a sound system by
breaking the common ground connection between the equalizer and other products.
C
G
L
HASSIS
ROUND
IFT
the chassis ground is separated from the electronic ground of the equalizer. This is sometimes nec-
essary to prevent Òground loopsÓ in a sound system.
F
:
Should the fuse fail, be sure to determine and remove the cause of the problem before replacing
USE
the fuse. Failure to do so could result in damage to the equalizer. The following is a list of fuse types
used for different AC voltage configurations:
100VAC
120VAC
230VAC
240VAC
:
Connects A.C. power to the equalizer.
Three types of input connectors are provided for input connections: female
:
Three types of output connectors are provided for output connections: male
:
Disconnects the grounding of the input connector from the equalizer's
WITCH
S
:
By removing the jumper connecting the two screws on the barrier strip,
TRAP
T 250mA 250V
200mA 250V Slow Blow
T 125mA 250V
T 125mA 250V
®
PROFESSIONAL PRODUCTS