909 RC1200 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Sierra 909 RC1200. 909 RC1200 12 páginas.

Changing the position of the shoe

CAUTION.

Always ensure that the saw is switched off

and unplugged from the power supply.

1. Pull the shoe adjustment lever out and position the

shoe to shield the length of saw blade as required.

2. Push the adjustment lever in to lock the shoe in position.

3. Position the angle of the shoe

as required by pivoting it on

its axis.

4. Where possible, rest the

shoe on the material being

cut. Change the angle of the

shoe to suit the shape of the

material.

CAUTION.

Do not operate the

reciprocating saw if the adjustable

shoe is damaged or not installed.

CAUTION.

Always ensure that the saw is switched off

and unplugged from the power supply.

1. The rear handle (5) can be rotated in either the right

or left direction by 90 degrees.

2. The rear handle must be "locked" into one of the three

preset positions. It must not be used at any position in

between these three preset positions as it might rotate

during use and create a hazard.

3. To rotate the handle (5) press on the handle rotation

release switch (6) and move the handle to one of the

present positions. It can be turned left or right