dbx DriveRack PA+ Manual de inicio rápido - Página 7

Navegue en línea o descargue pdf Manual de inicio rápido para Amplificador dbx DriveRack PA+. dbx DriveRack PA+ 16 páginas. 2-way setup

17.

Load New Preset

Press Select to Load

˘New Preset

At this point you are ready to load your new

preset. Press in on the Data Wheel to load

this new preset.

18.

AUTO-LEVEL

Connect RTA Mic to:

<NEXT PG> to advance

18A - Connect the

RTA-M mic here.

NOTE: This Auto-Level feature requires that signal be present from both High outputs of the DriveRack! If

you are not using both of these outputs, don't have the RTA mic, or do not want to use this feature, you can

skip this step by pressing the PRESET button. If you would still like to Auto EQ the system, press and hold

the Auto EQ button for 5 seconds then proceed to step 25.

19.

HIGH OUTPUTS

Verify amp

levels as shown

19A - Make sure your High Amp level matches the

level shown in the display.

20.

LOW OUTPUTS

Verify amp

levels as shown

20A - Make sure your Low Amp level matches the

level shown in the display.

RTA MIC INPUT

56% Level

53% Level

Press the Data Wheel. "Loading"

will appear in the display, and you

will move on to the Auto-Level

Wizard.

18B - Press the NEXT PG button.

19B - Press the NEXT PG button.

20B - Press the NEXT PG button.