909 T12 Series Manual - Página 8

Navegue en línea o descargue pdf Manual para Taladro 909 T12 Series. 909 T12 Series 17 páginas.

Imprimir página

• When operating a power tool outdoors,use an extension cord suitable

for outdoor use.Use of a cord suitable for outdoor reduces the risk of

electric shock.

• To reduce the risk of electric shock, the manufacturer recommends

the use of a residual current of 30mA or less at all times.

3). PERSONAL SAFETY

• To reduce the risk of electric shock, the manufacturer recommends

the use of a residual current of 30mA or less at all times.

• Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in serious

personal injury.

• Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes,

hard hat, or hearing protection will reduce personal injures.

• Prevent unintentional starting. Ensure the switch is in the "off"

position before connecting to power source and/or battery pack,

picking up or carrying the tool. Carrying power tools with your finger

on the switch or energising power tools that have the switch on

invites accidents.

• Remove any adjusting key or wrench before turning the power tool

on. A wrench or key left attached to a rotating part of the power tool

may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and

collection facilities , ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

4). POWER TOOL USE AND CARE

• Do not force the power tools. Use the correct power tool for your

application. The correct power tool will do the job better and safer at

the rate for which it was designed.

• Do not use the power tool if the switch does not turn it "on" and

"off". Any power tool that cannot be controlled with the switch is

dangerous and must be repaired.

Touch_IM_ED8.indd 8

• Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to

operate the power tool. Power tools are dangerous in the hands of

untrained users.

• Maintain power tools with care. Check for misalignment or binding

of moving parts, breakage of parts and any other condition that

may affect the power tool's operation. If damaged, have the power

tool repaired before use. Many accidents are caused by poorly

maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to

control.

• Use the power tool, accessories and tool bits etc. in accordance

with these instructions, taking into account the working conditions

and the work to be performed. Use of the power tool for operations

different from those intended could result in a hazardous situation.

5). USE AND CARE OF THE BATTERY PACK

• Verify that the switch is in the "off" position before inserting the

battery pack. Inserting the battery pack into a power tool that has

the switch in the "on" position invites accidents

• Recharging only with the charger specified by the manufacturer. A

charger that is suitable for one type of battery pack may create a

risk of fire when used with another battery pack.

• Use power tools only with specifically designated battery packs.Use

of any other battery packs may create a risk of injury and fire.

• When the battery pack is not in use, keep it away from other metal

objects ,like paper clips, coins,keys, nails, screws or other small

metal objects that can create a connection between the terminals.

Shorting the battery teminals together may cause bums or a fire.

• Avoid contact with any liquid that is emitted by a batttery. If the

battery pack is abused, liquid may escape from the battery. Liquid

emitted from the battery may cause irritation or burns. If liquid

comes into contact with the skin, wash the area immediately with

soap and water, and then neutralize the liquid with lemon juice or

vinegar. If contact occurs, rinse thoroughly with running ater. If liquid

comes into contact with the eyes, rinse thoroughly with running

water and seek medical help.

22/10/13 4:39:56 PM