DYNAPAR SLIM Tach SL85 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Media Converter DYNAPAR SLIM Tach SL85. DYNAPAR SLIM Tach SL85 14 páginas. Magnetoresistive encoder, designed for use in 0.625" to 3.000" 16mm to 76mm, shaft diameters
Imprimir página1.3 Specifications
Resolution
Frequency Response
Pulse Code
Output Channels
Duty Cycle
Quadrature Accuracy
Output Type
Rise and Fall Time
Current Consumption
ESD Protection
Output Current Capability
Connector
Suggested Cable
Input Voltage
Maximum Operational Speed
Nominal Air Gap
Shaft Axial End Play
Enclosure Configuration
Slew Rate
Approximate Box Weight
Box Dimension
Operational Temperature
Operational Humidity Range
Chemical Resistance
Vibration
Shock (Encoder Housing)
*CE
*NOTE: Provides CE compliance in applications where cable length is less than 30 meters.
Specifications subject to change without notice
5
NorthStar SLIM Tach
®
Electrical Specifications
512, 512Z, 1024, 1024Z, 2048 PPR
0 to 120KHz Max.
Incremental, marker, quadrature, complements (A, B, Z)
A & B (incremental), Z (marker)
50 ± 30% (within defined mechanical specs)
A-B 90º ± 22º
High Speed, Differential Driver
Less than 500 ns @ 10,000 pf (typical)
40 mA typical plus line driver load
2 kV
150 mA typical [350 mA maximum (worst case)]
10 pin Epic style, NEMA 4, 12 industrial connector
22 AWG, 8 conductor, 18" length, 4 twisted shield pairs
+5.0 to +15.0 VDC
Mechanical Specifications
5,000 RPM
0.019 ± 0.008 inch
Up to ± 0.045 inch maximum
4.5 - Inch Diameter, 56 C motor face or accessory flange to meet NEMA MG1-4
standards
12,000 RPM per second
4lbs. (1.81 Kg)
17.5" x 10.75" x 2.75"
Common Environmental Specifications
-40º to + 90º C
Maximum of 98%
Salt Spray, Most Solvents, Mild Acids and Bases
Minimum 18 g's RMS, 5-2000 Hz
1 meter drop tested, min 30 g's shock spectrum
Standards
EN 61326
DYNAPAR
©
SL85 Instruction Manual
+1.800.873.8731