909 BL2400 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Soplador 909 BL2400. 909 BL2400 16 páginas.

Assembly

The blower vacuum requires some assembly prior to use

for the first time This includes the fitting of the blow/vac tube

to the housing and the fitting of the collection bag.

Assemble the tube and wheel bracket

1 Insert the lower tube to the

upper tube and screw them

together.

2. Locate one screw

(ST4.2x50) in big screw

hole on upper tube.

Do not overtighten.

3. Push the wheel assembly

onto the lower tube, up to

the stop. Use the screw

provided to clamp onto the tube.

4. Assemble the wheel

bracket: Insert the wheel

bracket from the end

lower tube until it reach

the rib position and cannot

forward again.

5. Locate one screw

(ST4.2x18) in the screw

hole on wheel bracket.

6. Tighten the screw firmly.

Do not overtighten the screw.

Fitting the tube to the head

1. Locate the tubes into the blower head. Push in until

they stop.

2. Using the screw provided (ST4.2x50) fasten the tubes

to the head.

Fitting the collection bag

1. When connecting the

bag to the unit, locate the

longer strap and connect it

to the hook on the tube.

2. Grasp the shorter

connector strap and

connect it to the hook

at the back of the unit

3. Take the square connector

and push over the unit outlet. The two side clips will

locate into the housing.