Galaxy Audio ANY SPOT AS-1400-2P Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Galaxy Audio ANY SPOT AS-1400-2P. Galaxy Audio ANY SPOT AS-1400-2P 12 páginas. Wireless personal monitor

Imprimir página

System Setup

GROUP
CHANNEL
STEREO
MONO
R
Fig. 1
GROUP
CHANNEL
STEREO
MONO
R
Fig. 2a
GROUP
CHANNEL
STEREO
MONO
R
Fig. 2b
GROUP
CHANNEL
STEREO
MONO
R
Fig. 3
GROUP
CHANNEL
STEREO
MONO
R
Fig. 4
System Setup
Programming the Transmitter
1. Power On:
Hold the power button for 3 seconds to power on the transmitter.
Display will light up. Hold for another 3 seconds to turn off.
MHz
2. Frequency Group and Channel Selection:
Press the "SET" button. The display will flash "GROUP". Press
or
to select a suitable frequency group number as shown in Fig. 2a.
MHz
Press "SET" again. The display will flash "CHANNEL". Press
or
to select a suitable channel as shown in Fig 2b.
Note: When using multiple systems, for optimum results, set all of the
systems to the same group number and select a different channel
number for each system in that group.
MHz
3. Stereo/Mono Input Mode Selection:
Press the "SET" button 3 times, the "STEREO" will flash. Press
or
button to select Stereo or Mono, then press set again to set
the selected mode as shown in Fig. 3.
MHz
4. Locking Control Selection:
Press the "SET" button 4 times, the "
or
button to select Lock or Unlock status as shown in Fig. 4.
MHz
6
" will light up. Press