Galaxy Audio Any-Spot AS-1800 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Galaxy Audio Any-Spot AS-1800. Galaxy Audio Any-Spot AS-1800 12 páginas. Galaxy audio any-spot professional wireless in-ear monitor system

Imprimir página

Thank you for choosing a Galaxy Audio professional wireless in-ear monitor system. You have

joined thousands of other satisfied customers. Our years of professional experience in design

and manufacturing ensure our products' quality, performance and reliability.

1. Introduction

1. EIA-standard metal materials half - rack transmitter chassis.

2. Durable, ergonomic metal body Receiver with soft-touch controls.

3. 16MHz Bandwidth, 640 Selectable UHF frequencies / 32 Channels and True Diversity

reception for interference-resistant operation and High-visibility white LCD information

display

4. PLL (Phase Lock Loop frequency control) design ensures transmission reliability, "Noise

Lock" squelch effectively blocks stray RF.

5. Designed to provide incredible audio quality and reliable performance for artists,

broadcasters and other demanding audio environments.

2. Transmitter Installation and Connections

Installation

1. For better operation the transmitter should be at least 3ft. (1m) above the ground and at

least 3ft. away from a wall or metal surface to minimize reflections.

2. Keep antennas away from noise sources such as computer, digital equipment, motors,

automobiles and neon lights, as well as away from large metal objects.

3. Antenna are normally positioned 45° from vertical for best transmission.

4. Keep open space between the receiver and transmitter for better reception.

5. The transmitter should be at least 6ft. (2m) from the receiver.

Connections:

1. The 12V, 500mA switching power supply is designed to operate properly from any AC

power source without user adjustment. Simply connect the transmitter to a standard AC

power outlet, using only an IEC-type input cordset approved for the country of use.

Power to the unit is controlled by the front panel power switch.

2. There are two audio inputs on the rear panel: 1/L and 2/R audio INPUTS. Suitable for

an XLR balanced audio input connector and a Unbalanced 1/4" (6.3mm) input

connector. The two audio inputs simultaneous feed from two different outputs.

Use the appropriate shielded audio cable for connections between the transmitter and the

output(s) of the mixer or other audio output equipment.

Introduction