AGRO ELECTRO 0146-4 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Fuente de alimentación AGRO ELECTRO 0146-4. AGRO ELECTRO 0146-4 20 páginas. Illumination system with solar panel charge controller led bulbs

Imprimir página

Stopping the system

Before altering the connections, cover the solar panel with a light

barrier material to stop the electricity production.

First switch off the lights, disconnect the consumers, the accumu-

lator may be disconnected only after this. Carefully avoid leaving the

consumers powered without a connected accumulator, especially in

a sunny day, since over-voltage may damage the devices!

Maintenance

From time to time clean the surface of the solar panel with a wet

cloth. The accumulated dust, leaves or animal waste can decrease

significantly the performance of the solar panel, which may lead to

unwanted depletion of the accumulator.

Avoid the depletion of the accumulator during the night, or during

dark, cloudy days. Periodically look at the lights on the charge

controller to check the charge level. Recharging the accumulator

needs a lot of power at the expense of the powered devices. Keeping

the accumulator almost charged ensures a long and trouble-free life

of the system.

The fuse

In the case of an unwanted short circuit, the fuse (Fig. A,

burned out. Although it is a working method to replace the burned

fuse with a thin copper wire, we highly recommend purchasing spare

fuses in order to prevent causing more damage to the system in an

event of a new short circuit.

The frequent causes of burning the fuse include:

• The distortion of the connectors inside the bulb socket, due to

a wrong disassembly-assembly.

• Accidental touching of the wires inside the bulb socket, following

an incorrect assembly after the power wires have been extended

or mounted.

• Short circuits in bulbs after burning out.

• Connecting a defective consumer to the system.

Fuse parameters: 5×20 mm, glass, 10 A.

To verify or to replace the fuse, unscrew the fuse socket cap

(Fig. A), take out the fuse and check the presence of the thin

wire in the glass tube in the front of a strong light.

Warranty

Thank you for choosing this illumination system! We offer a warranty

of 12 months, starting with the date on the invoice. During this period

we will fix or replace the defective elements for free, but only when

the warranty conditions below are fulfilled.

In the event of any defect during the warranty period please contact

us by e-mail at [email protected], or by phone at +40 724 776 515

for the possible remediation the problem, or to discuss the shipping

details of the defective components.

ATTENTION: the bulbs and the fuse are considered as consumables,

therefore these aren't covered by warranty! The consumer has to

replace these parts from own budget.

) may be

ATTENTION: it is allowed to modify the system by extending or

replacing the wires in order to shorten/extend these, but prob-

lems caused by inappropriate insulation or wrong contacts result in

voiding the warranty!

The average usage duration of the products is five years. For this

period, the buyer benefits, for a fee, of post-warranty service, with

original parts.

The warranty conditions are regulated by the Romanian law and our

company's business policies, based on the following laws and emer-

gency government decrees: O.G. 21/1992, based on the 449/2003 law,

modified by O.U.G. 174/2008, O.U.G. 34/2014 and by O.G. 9/2016. The

consumer rights are not affected in any way by the provided warranty.