DC Athletics CANNIBAL I Manual - Página 6

Navegue en línea o descargue pdf Manual para Bicicleta estática DC Athletics CANNIBAL I. DC Athletics CANNIBAL I 6 páginas. Speed bike console

•

REPLACE BATTERY

When the display color fades, or with flash when operate buttons，means the battery has no

enough power. Take off the battery cover, and use 2pcs new 1.5V AAA UM-4 battery to replace the

old battery

When the computer cannot receive the sensor's signal, it mean s the sensor is low battery ，

and you need to replace the battery as soon as possible. Loosen the sensor's screw, take out the

sensor, use the coin to twist the battery cover, and put 1 piece CR2032 battery inside properly,

then twist the cover back. Install the sensor back to the related place，make sure the sensor's

triangle"∆" is aligning with the magnet and the distance between the two is less than 10mm.

Remark: Either party's battery changed ，you need to operate the code matching again for the

computer and sensor, or the computer can't correctly receive the sensor's data. The code matching

operation ，please refer to CODE MATCHING.

•

Q&A

If there's no data display or speed change when you riding the bike:

Check the installation of the magnet and sensor. Make sure the magnet is align with the sensor

's triangle icon "∆"， and keep the distance between the two less than 1Omm. Or else, please adjust

the sensor's place

Check the sensor's voltage is over 2.6V or not ，if yes: change the sensor 's battery;

Check the display is dark or not ，or the display is flashing or not when press button s, if yes,

change the computer's battery 4.lf the above three item s are OK, please operate the code matching

according to CODE MATCHING.