Autonics BJ3M-PDT-C-P Manual del producto - Página 3
Navegue en línea o descargue pdf Manual del producto para Sensores de seguridad Autonics BJ3M-PDT-C-P. Autonics BJ3M-PDT-C-P 5 páginas. Rectangular photoelectric sensor
Specifications
Model
BJ□-TDT-C-□
Sensing type
Through-beam
Sensing distance
10 m
15 m
Sensing target
Opaque materials
Min. sensing target
≥ Ø 12 mm
Hysteresis
-
Response time
≤ 1 ms
Light source
Red
Infrared
Peak emission
660 nm
850 nm
wavelength
Sensitivity adjustment
YES (Adjuster)
Mutual interference
-
prevention
Operation mode
Light ON mode - Dark ON mode selectable (Adjuster)
Indicator
Operation indicator (red), stability indicator (green), power indicator (green)
Approval
ᜢ ᜫ
Unit weight (packaged)
≈ 20 g (≈ 45 g)
01) Reflector (MS-2A)
02) Non-glossy white paper 100 × 100 mm
03) Non-glossy white paper 300 × 300 mm
04) Only for the emitter
Power supply
12-24 VDCᜡ ±10 % (ripple P-P: ≤ 10%)
Current consumption
It depends on the sensing type
Through-beam
Emitter: ≤ 20 mA, receiver: ≤ 20 mA
Reflective
≤ 30 mA
Control output
NPN open collector output / PNP open collector output Model
Load voltage
≤ 26.4 VDCᜡ
Load current
≤ 100 mA
Residual voltage
NPN: ≤ 1 VDCᜡ, PNP: ≤ 2.5 VDCᜡ
Protection circuit
Reverse power protection circuit, output short overcurrent protection circuit
Insulation resistance
≥ 20 MΩ (500 VDCᜡ megger)
Noise immunity
±240 VDCᜡ the square wave noise (pulse width: 1 ㎲) by the noise simulator
Dielectric strength
Between the charging part and the case: 1,000 VACᜠ 50/60 Hz for 1 min
Vibration
1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock
500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Ambient illuminance
Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx
(receiver)
Ambient temperature
-25 to 55 ℃, storage: -40 to 70 ℃ (no freezing or condensation)
Ambient humidity
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
Protection rating
IP67 (IEC standard)
Connection
Connector type
Connector
M8 4-pin plug type
Case: PC+ABS, CAP: PC, sensing part: PMMA, bracket: SUS304, bolt: SCM, nut: SCM,
Material
sleeve: Brass, Ni -plate
BJ3M-PDT-C-□
BJ□-DDT-C-□
Polarized retroreflective Diffuse reflective
100 mm
300 mm
3 m
01)
02)
03)
Opaque materials,
Opaque materials
translucent materials
≥ Ø 75 mm
-
-
≤ 20% of sensing distance
≤ 1 ms
≤ 1 ms
Red
Infrared
Red
660 nm
850 nm
660 nm
YES (Adjuster)
YES (Adjuster)
YES
YES
ᜢ ᜫ
ᜢ ᜫ
≈ 30 g (≈ 55 g)
≈ 10 g (≈ 35 g)
Sold Separately: Bracket A
• Unit: mm, For the detailed drawings, follow the Autonics website.
1 m
03)
Infrared
850 nm
04)
Sold Separately: M8 Connector Cable
• For detailed information, refer to the 'M8/M12 Connector Cable' manual.
Appearance
Power
DC
DC
DC
DC
17
5
3
3.4
Ø3.4
22
15
Ø3.4
Connector 1 Connector 2 Length Feature
2 m
M8 (Socket-
Female)
4-wire
4-pin
5 m
2 m
M8 (Socket-
Female)
4-wire
4-pin
5 m
2 m
M8 (Socket-
Female)
4-wire
4-pin, L type
5 m
2 m
M8 (Socket-
Female)
4-wire
4-pin, L type
5 m
Model
CID408-2
PVC
CID408-5
CIDH408-2
Oil resistant
PVC
CIDH408-5
CLD408-2
PVC
CLD408-5
CLDH408-2
Oil resistant
PVC
CLDH408-5