iHealth BP7 Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Tensiómetro iHealth BP7. iHealth BP7 16 páginas. Wrist
También para iHealth BP7: Manual del usuario (16 páginas), Manual de inicio rápido (4 páginas)
Imprimir página
Display reads an
abnormal result
Bluetooth connection
unstable
No response
CARE AND MAINTENANCE
1.
Do not drop this monitor or subject it to strong impact.
2.
Avoid high temperature and direct sunlight. Do not immerse the monitor in water as this
will result in damage to the monitor.
3. If this monitor is stored near freezing temperatures, allow it to acclimate to room temperature
before use.
4.
Do not attempt to disassemble this monitor.
5. If the monitor is not used for a long time, please sure to fully charge it every month.
Wrist or monitor was
moved during test
The cuff does not inflate
properly or pressure falls
quickly during test
Irregular heartbeat
(arrhythmia)
The cuff was not
properly applied or the
rubber tube was bent or
pressed
The cuff position was not
correct or it was not
properly tightened.
Body posture was not
correct during testing
Speaking, moving wrist
or body, being angry,
excited or nervous during
test
Bluetooth connection
unsuccessful, BP7 is
abnormal, or strong
electromagnetic
interference is present
Incorrect operation or
strong electromagnetic
interference
Retest, make sure not to move your
wrist or the monitor
Review the cuff application
instructions and retest
It is inappropriate for people with
serious arrhythmia to use this
monitor.
Check with physician.
Review the cuff application
instructions and retest
Review the cuff supplication
instructions and retest.
Review body posture instructions
and retest
Retest when calm; avoid speaking or
movement during the test
Reset iOS device. Reset BP7 by
pressing the START/STOP button
about 10s. Make sure the monitor
and iOS device are away from other
electrical equipment. Please see
GENERAL SAFETY AND
PRECAUTIONS.
Press the START/STOP button
about 10 seconds to reset the device,
relaunch app, and reconnect the iOS
device to the monitor
9