DC-Digital DC-25TZ-3 Instrucciones de uso e instalación - Página 3

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Reloj DC-Digital DC-25TZ-3. DC-Digital DC-25TZ-3 4 páginas.

12/24 Hour

Set

Switch

Hours

 12 hour or 24 hour mode: This toggle switch determines the clocks displaying either

12 hour or 24 hour format. This is clock wide meaning all the clocks will display the

same format.

 The unit consists of (1) master clock and (2) secondary clocks. The master clock is

responsible for synchronizing the minute-units and seconds of the secondary clocks.

 Note: All momentary set switches for setting the time are located above each of

their respective time zone clock.

 Setting the master time zone:

 Set Hours: Press and hold the Set Hours switch above the display until the

desired value is reached.

 Set Minutes: Press and hold the Set Minutes switch above the display until

the desired value is reached.

 The master clock will send the corrected minute-units and zero seconds to the

secondary clocks every ten seconds. This will show by the secondary clocks'

colon flashing.

 Setting the secondary time zones:

 Set Hours: Press and release the Set Hours switch above the display until the

desired value is reached.

 Setting the minute-tens offset: Press and hold the Set Hours switch above

the display. The minute-tens place for that clock should increment by 1 every

second. This allows for those time zones with 30 minute offsets for example.

Set

Set Hour /

Minutes

Minute Tens

Set Hour /

Minute Tens

3 |

P a g e