Galaxy Press GS-205B Manual de instrucciones

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Galaxy Press GS-205B. Galaxy Press GS-205B 13 páginas.

basic precautions should always be followed,

1. Read all instructions.

2. Use heat press only for its intended use.

3. To reduce the risk of electric shock, do not immerse the heat press in water or

other liquids.

4. Never pull cord to disconnect from outlet, instead grasp plug and pull to

disconnect.

5. Do not allow cord to touch hot surfaces, allow heat press to cool completely before

storing.

6. Do not operate heat press with a damaged cord or if the equipment has been

dropped or damaged.To reduce the risk of electric shock, do not disassemble or

attempt to repair the heat press. Take it to a qualified service person for

examination and repair. Incorrect assembly or repair could increase the risk of fire,

electric shock, or injury to persons when the equipment is used.

7. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

8. Close supervision is necessary for any heat press being used by or near children.

Do not leave equipment unattended while connected.

9. Burns can occur when touching hot metal parts.

10. To reduce the likelihood of circuit overload, do not operate other high voltage

equipment on the same circuit.

11. If an extension cord is necessary, then a 20 amperage rated cord should be used.

Cords rated for less amperage may overheat. Care should be taken to arrange the

cord so that it cannot be pulled or tripped over.

Operation Manual

(GS-205B)

Safety Instructions

When using your heat press,

including the following: