Autonomic MMS 5A Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Servidor Autonomic MMS 5A. Autonomic MMS 5A 17 páginas. Mirage media server

Set Up Your Mirage Media Server

This section provides an overview of powering up your server for the first time and using the

Remote Configuration Utility to configure the device.

Once you have made all the necessary connections, turn on the MMS by pressing the power

button on the front of the unit once. You should see that the power LED illuminates.

Wait 2-3 minutes for your server to completely boot up the first time, or if your server is

connected to a video display, wait until the Now Playing screen shows on the display.

The Mirage Media Server has a built-in web server that provides for remote configuration of

the server, control system integration, and control of music playback with the Mirage player

interface.

The MMS is configured at the factory to automatically obtain a network IP address from your

DHCP server (usually your router).

Using any computer on the same network, open the MMS Remote Configuration Utility with

your Internet browser using the default configuration address for your server model:

MMS·5A:

http://Mirage-1/config

MMS·2:

http://MMS·2/config

On some computers (especially Macs) you will need to add the

server name (example:

You can also look up the IP address of the server using the DHCP client table in your router's

interface if necessary.

Once you have connected to the MMS configuration page, you will see several tabs for

configuring your MMS:

6 of 16

http://Mirage-1.local/config

suffix to the end of the

.local

Mirage Media Server Set Up