DCB 8 DBRA Manual de instalación y configuración - Página 5

Navegue en línea o descargue pdf Manual de instalación y configuración para Hardware de red DCB 8 DBRA. DCB 8 DBRA 17 páginas. Data bridge card

Select "B - > Backup Setup" Select "1+1 Port Backup". This selection pairs ports 1 & 5, 2 & 6,

3 & 7, 4 & 8. They are digitally bridged together.

SLOT 3 8DBRA P1

ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS

Backup Type : 1+1 Port Backup

Warning!! Change Backup Type will clear map.

Next you can select "S - > RS232 Config Setup". This is reference only. The card supports any

async speed up to 19200 bps regardless of what is on this screen.

SLOT 3 8DBRA P1

ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS

RATE

: 9.6KBps

Interface : 8RJ

Back out to the Port Menu and select "K - > Port Map Setup" See the port map setup on the

next page. You will need to map only ports 1, 2, 3 and 4.

In the example below, RS232 (the physical port) is mapped to time slots 1, 2 and 3 of Virtual Port

1. This will allow the data from RS232 port 1 to be mapped to 3 different DS-0s. Use the arrow

keys to move down the screen from Virtual Port, to TS start, to Total TS, RS232 Port and

Command. When you get down to "Command

selection. Using the arrow key does not accept the mapping.

G -> Upgrade Firmware

=== Backup Setup ===

=== RS232 Setup ===

: Set", use the "Enter" key to accept the

Page 5

DCB, Inc.

2949 CR 1000 E

Dewey, Illinois

61840

217.897.6600 Tel

800.432.2638 Toll Free

217.897.1331 Fax

www.dcbnet.com

12:01:19 12/01/2010

12:04:25 12/01/2010