high pointe EM923MI2-S Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Horno microondas high pointe EM923MI2-S. high pointe EM923MI2-S 17 páginas.

BEVERAGE

a) Press " BEVERAGE " repeatedly until the number you wish appears in the

display, "1", "2", "3" cup will display in order.

For example, press "BEVERAGE" once, "1" appears.

b) Press "START/+30 SEC." to cook, buzzer sounds once. When cooking finish

sounds five times.

DINNER PLATE

a) Press " DINNER PLATE " repeatedly until the number you wish appears in the

display, "9.0","12.0","18.0" oz will display in order.

For example, press "DINNER PLATE" once, "9.0" appears.

b) Press "START/+30 SEC." to cook, buzzer sounds once. When cooking finish

sounds five times.

PIZZA

a) Press " PIZZA " repeatedly until the weight of your pizza appears in the

display, "4.0", "8.0", "14.0" oz will display in order.

For example, press "PIZZA" once, "4.0" appears.

b) Press "START/+30 SEC." to cook, buzzer sounds once. When cooking finish

sounds five times.

(1) Press "0/MEMORY" to choose memory setting 1-3. The LED will display 1,2,3.

(2) If the setting has been program ed, press " START/+30 SEC." to use it. If not, continue

ch ose the setting. Only one or two stages can be set.

(3) After finishing the setting, press "START/+30 SEC." once to save the setting.

Press " START/+30 SEC." again, it will start cooking.

Example: to program the following setting as the second memory,

to cook the food with 80% microwave power for 3 minutes and 20 seconds.

The steps are as follows:

a. In waiting state, press "0/MEMORY" twice, the screen displays "2".

b.Press "TIME COOK" once, then press "3", "2", "0" in order.

c. Press "POWER" once, "PL10" displays, then press "8" and "PL8" displays.

d. Press "START/+30 SEC." to save the setting. Buzzer sounds once and the LED will

display "2". If you press "START/+30SEC." again, the setting will be saved as

memory 2 and it will start cooking.

e. If power is lost, the "0/MEMORY" setting will need to be reprogram e .

f. If you want to run the saved setting, in waiting state, press "0/MEMORY" twice,

screen displays "2", then press "START/+30SEC." to run.

EN-13

, buzzer