Autool BT360 Manual de inicio rápido - Página 6

Navegue en línea o descargue pdf Manual de inicio rápido para Equipos de prueba Autool BT360. Autool BT360 19 páginas. Battery system tester

AUTOOL

Autool BT360 Battery System Tester

3. Operation

Shake the clamps back and forth to make sure they are well

connected. Tester requires the two clamps are well connected with

the battery poles, otherwise, the test cannot go on. When enter the

battery test program, screen prompts "Check Connection ", do clean

the poles and re-connect in the right way.

Tester has reverse connection protection function. When clamps are

reversely connected, tester screen will not light, but it damages

neither the tester nor the automotive load.

NOTE: For parallel connected batteries, break off the cathode

connection first, then do single test to each battery. Suppose

cathode connection is not cut off, there will be error in test result.

● Up / Down key

Select upwards or downwards via white UP and DOWN keys.

● Return key

Return to previous menu via blue RETURN key.

● OK key

Confirm the selection via green OK key

Tester automatically starts up after the clamps are correctly

connected, and displays the AUTOOL startup interface (Default