Autool BT360 Manual de inicio rápido - Página 9

Navegue en línea o descargue pdf Manual de inicio rápido para Equipos de prueba Autool BT360. Autool BT360 19 páginas. Battery system tester

AUTOOL

Autool BT360 Battery System Tester

Now the tester detects the surface charge has been eliminated, turn

lights off as prompted, then press OK key. The tester will recover

automatic test

OUT-OF-VEHICLE means battery is not connected with any of the

vehicle loaded, i.e. battery connection is cut off.

3.4.2 Select Battery Charge State

After selecting the battery location, tester will prompt to select the

battery charge state, i.e. Before Charge or After Charge.

Press UP/DOWN key to select battery charge state, then press OK

key to confirm. In this way, it ensures a more accurate test result.

In Vehicle, select Before Charge for Cold Vehicle and After Charge

for Hot Vehicle.

After the battery charge status selected, tester will prompt to select

battery type, i.e. Regular Flooded, AGM Flat Plate or AGM Spiral,

and Gel battery. Press UP/DOWN key to select battery type, then

press OK key to confirm.