Autool BT760 Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba Autool BT760. Autool BT760 13 páginas. Battery system tester
Imprimir página
•
Load test is the test of battery pack, DC power supply, UPS
backup battery maintenance and capacity detection.
•
Additional functions include: language setting, voltmeter
and screen brightness adjustment.
Technical Parameters
•
Cold Cranking Amps Measure Range:
CCA (USA): 20-3000; IEC (International): 20-2500;
EN (Europe): 20-3000; DIN (Germany): 20-2500;
JIS (Japan): 26A17-N200Z ; Other Species.
•
Voltage Measure Range: 6v~ 30v DC.
•
Current Measure Range: 4 AH~ 240AH.
•
Working temperature: -20°C~ 50°C
•
Shell material: Acid resistant ABS material
Working Steps
It is applicable for automotive manufacturers, automotive
maintenance and repair workshops, automotive battery
factories, automotive battery distributors, and educational
organizations, etc.
Pre-test
Connect Tester
Shake the clamps back and forth to make sure they are well
connected. Tester requires the two clamps well connected with
the battery poles, otherwise, the test can not go on.The red to
the positive and the black to the negative, then the tester display
will show the starting interface.
4
•
When the measured battery voltage is lower than 6.0V, the
normal test cannot be performed. Press OK to continue.
Key Description
•
Up / Down /Left /Right /Key(2,7,4,6)
Select upwards or downwards via white UP and DOWN keys.
•
Return key(1)
Return to previous menu via return key.
•
OK key(5)
Confirm the selection via green OK key
•
Print key(3)
1
4
Start Tester
According to the tester's prompt, press the up and down keys to
select in sequence:
①Battery system test
②Starting system test
③Charging system test
④Load test
⑤Language setting
⑥Help
2
3
5
6
7
5