Autool CT400 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba Autool CT400. Autool CT400 14 páginas. Injector cleaner & tester

can be blocked. Drain the test liquid by removing the level indicator on the left of

the main unit. It is better to clean the fuel tank with a little test liquid before the

tank is filled in with the new liquid. After cleaning, close the test liquid valve

again and pour in new test liquid.

Replacement of Fuse

● There is a square box marked with a fuse at the power socket on the left

side of the equipment, and the fuse can be seen by opening the square box. If it

is blown, replace it with a new one (5A).

Precautions

● Since the test device is quartz glass, which is easy to be broken, please

don't place other objects around the device to avoid breaking by bumping.

● If there is no digital display after power on (there may be a delay of several

seconds), please check whether the power supply has electricity; if there is a

power failure, please check whether the plug is firmly connected, or check

whether the fuse is blown. If there is no break, and the switch is still not working

after pressing several times, please contact your local dealer, do not disassem-

ble it by yourself, otherwise our company shall not warranty.

● Do not switch on the ultrasonic system when there is no ultrasonic

detergent in the ultrasonic cleaning chamber. Otherwise, damage to the

ultrasonic cleaner can result.

● It must be emptied completely before adding 1000ml of test liquid for every

test liquid change.

● The use of unqualified test liquid will cause corrosion of the pump and oil

supply line and failure of the pressure gauge.

● Only the ultrasonic cleaning liquid matched with the machine can be added

to the ultrasonic bath, and other cleaning liquid can not be used instead,

otherwise, the surface coating of the equipment and the mask will peel off, which

will not be covered by the warranty.

● Kerosene, gasoline, pure water and other testing and cleaning solutions are

strictly forbidden to be used as the testing and cleaning solution for this equip-

ment. Otherwise, it will damage the "O" ring and rubber parts of the pipeline

inside the equipment and cause leakage.

● Do not mix cleaning liquid with testing liquid.

● Please place the machine on a flat surface and use the four feet to support

the weight of the machine, otherwise the ultrasonic cleaning bath will be

damaged, which is not covered by the warranty.