high pointe RocketRAID 2840A Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Controlador high pointe RocketRAID 2840A. high pointe RocketRAID 2840A 16 páginas. Sas 6gb/s pci-express 3.0 x8 raid controller
Imprimir página
3. Using the RocketRAID 2840A
3.1. Using the RocketRAID Series HBA BIOS
3.1.1 RocketRAID BIOS Setting Utility
The RocketRAID controller BIOS utility is an interface that provides management
commands and controller related settings.
After installing the RAID controller and powering on the system, the RAID
controller BIOS should post during the system's boot procedure.
Use Ctrl + H key to log-in to the BIOS setting utility. The BIOS setting utility can be
used for RAID management. The BIOS Utility will display information about hard
drives attached to the adapter. Make sure all attached drives are detected by this
utility. If any of the hard drives is not detected, power down the system and
check the power and cable connections.
Note: The following screenshots depict the RocketRAID 2840A BIOS utility.
However, all RocketRAID models utilize the same interface.
6