Autopage C3-RS-601 Manual de instalación - Página 10

Navegue en línea o descargue pdf Manual de instalación para Arranque a distancia Autopage C3-RS-601. Autopage C3-RS-601 19 páginas. Remote car starter
También para Autopage C3-RS-601: Manual de instalación de inicio rápido (2 páginas)

Imprimir página
5-WIRE ALTERNATING DOOR LOCK
Green Wire
Master Door
Lock Switch
86
3 Pin Plug
87
87a
30
To Alarm
85
86
87
87a
30
85
Blue Wire
To Door
Lock Motors
VACUUM OPERATED CENTROL LOCKING
Green Wire
87
+12V
3 Pin
Plug To
86
Alarm
87
Blue Wire
VACUUM OPERATED DOOR LOCKING SYSTEM:
TYPICAL OF MERCEDES BENZ AND AUDI.
Locate the wire under the driver's kick panel. Use the
voltmeter connecting to ground, verify that you have the
correct wire with the doors unlocked, the voltmeter will
receive "12 volts". Lock the doors and the voltmeter will
read "0 volt". Move the alligator clip to +12V and the
voltmeter will receive "12 volts". Cut this wire and make
connections. Be sure to program door lock timer to
3.5 seconds.(See Alarn Feature
H7 Flashing LED. Connect to LED Plug
H8. RS232 C3 SERIAL TWO-WAY DATA PORT CONNECTION:
This connector is to be used for Serial Data communications with I-Datalink modules by Auto Page only!
DO NOT CONNECT THIS TO ANY OTHER WIRING!
This connector will transmit digital codes to operate all functions of Autopage data modules. When these modules are used, no other data bus
connections need to be made to the
provide greater theft protection as well as aid in the installation of this produc t. The RS-232 serial harness is provided with all Autopage serial data
modules and is not included with the
Telematics system is available at any authorized Autopage dealer.
This port will only operate correctly with Autopage C3 I-Datalink Modules
RS-603 REV A.
Splice
Cut the Existing
X
Unlock Wire
Splice
+12V
Cut the Existing
X
Lock Wire
86
Door Switch
87a
30
X
Cut
85
Compressor
87a
30
85
II – 5
Programming.)
RS-603.
The Data Bus module will receive its commands directly from the CPU of the
RS-603.
This two-w ay data port has been designed for use with all C I 3 compatible components. C 3
+12V
POSITIVE TRIGGER DOOR LOCK SYSTEM
Blue Wire Door lock
Green Wire Door Unlock
.
PROGRAMMING
10
Locking
Master
Switch
+ 12V
To Exiting
Door Lock Relay
RS-603.
7/9/2008
This will