Autopage BPS-4 Plantilla de montaje

Navegue en línea o descargue pdf Plantilla de montaje para Electrónica del automóvil Autopage BPS-4. Autopage BPS-4 2 páginas. Backup parking sensor

Imprimir página

16184-R4 Backup Instructions.qxp

2/24/2006

10:31 AM

Mounting Template

Large Cars

Mid-size Cars

Small Cars

Detecting Range

Wiring

Sensors

Ground

BPS-4

Backup Parking Sensor

The Auto Page BPS-4 Backup Parking Sensor system consists of

Distances and Activation

sensors, a main control unit and a LED display. It is designed to be an aide

in reversing or parking a vehicle by sensing objects behind the vehicle. This

Stage Approx. Distance to object

Sound & Sight

ultrasonic device will sense the distance of an obstruction or other vehicle

and alert the driver of its presence and approximate distance.

3-5ft (100-150cm)

Short Beeps/Slowly Flashing LED Display

2-3ft (50-90cm)

Longer Beeps/Quickly Flashing LED Display

This use of the Auto Page BPS-4 system should never replace normal

operational and safety precautions needed for reversing a vehicle. Caution

0-2ft (0-50cm)

Continuous Beep/Continuous LED Display

should always be taken in any vehicle operation.

Page 1

Sensor Locations Approximate

4 Sensor Location

23.62" (60cm) from Center

4 Sensor Location

20.7" (52.5cm) from Center

Sensor Placement

Yes

See Template for approximate

The proper placement of the sensors is important both for appearance and

Generally, it is best to mount the sensors as high as possible in the bumper.

for the proper operation of the unit. Sensors should be mounted at 90°

Use the provided mounting template as a guide for the proper spacing of

angles to the ground. It is important to avoid obstructions caused by

the sensors. First, find the centerline of the bumper. Then use tape to place

bumper shape.

the template on the bumper making sure to align the bumper centerline

with the Template arrow. (After proper placement of the sensors on one

side of the bumper, the template can be turned over to start the other side

of the bumper.)

2 Sensor Location

14.37" (36.5cm) from Center

2 Sensor Location

12.40" (31.5cm) from Center

4 Sensor Location

17.7" (45cm) from Center

Sensor Placement

Control Unit,

Importantly, BEFORE drilling the sensor holes make sure there

Route the sensor wires through the bumper to a suitable location in the

are no obstructions inside the bumper at the sensor locations.

vehicle trunk or rear hatch. This is where the main control unit should be

Also be sure that the bumper surface and the sensors will fit at 90° to the

mounted. Connect the main control unit RED wire to a positive charge wire

ground. Minor adjustments can be made by rotating the sensors.

of the vehicle back-up light. Connect the main control unit BLACK wire to

a stable ground. (Note: Do not use the negative charge wire of the

vehicle back-up light for ground. Some vehicles have a 'check

bulb' feature that makes that wire not a true ground.)

Route the main control unit LED Display Wire from the main control unit to

the vehicle interior, and connect to the LED display. Mount the LED display

on the inside of the vehicle rear window so it can be easily seen by the

driver when looking over the shoulder and in the vehicle rear view mirror.

PLACE ON THE CENTER OF THE BUMPER

4 Sensor Location

7.88" (20cm) from Center

4 Sensor Location

6.9" (17.5cm) from Center

4 Sensor Location

2 Sensor Location

10.43" (26.5cm) from Center

5.9" (15cm) from Center

WARNING!

LED Locations/Wiring

Some objects may not be detected.

This devise is only an aid and should not be solely relied upon for safely

backing up a vehicle. The system may not work correctly if the sensors are

obstructed by mud, snow, ice, or heavy dirt. The sensors may produce false

readings when snowing or in heavy wind or rain.

Please insure that the system beeps twice when reverse mode is engaged.

This will indicate that the system is operational.

Warranty and Provisions

The Auto Page BPS-4 is warranted against defect in material and

workmanship for a period of one year from date of original purchase. The

Auto Page Backup Parking Sensor System is strictly a driver assistance

device and should never be a substitute for safe driving practices. To help

prevent accidents, always use caution and common sense when reversing

a vehicle. Drivers should always perform visual checks before moving a

vehicle. The Auto Page Backup Parking Sensor System is a driver assistance

device and should never be relied upon as a substitute for safe driving

practices. Product owner is not entitled to recover from Auto Page, its

successors or assignees or vendors, incidental and/or consequential

damages such as personal injury, loss of income, loss of time, loss of

profits, loss of vehicle use or property damage. No employee, agent or

representative of Auto Page or the Selling Retailer or Installer may modify,

alter or extend this Warranty in any way. Specific legal and other rights

may vary from state to state.