Dynasty DY-BT35 Instrucciones de instalación y manual de instrucciones - Página 4

Navegue en línea o descargue pdf Instrucciones de instalación y manual de instrucciones para Chimenea de interior Dynasty DY-BT35. Dynasty DY-BT35 8 páginas.
También para Dynasty DY-BT35: Instrucciones de instalación y manual de funcionamiento (9 páginas)

Imprimir página
unit: mm
MODEL
DY-BT35
DY-BT44
DY-BT55
DY-BT63
DY-BT79
LOCATING YOUR ELECTRIC FIREPLACE
Your new electric fireplace may be installed virtually anywhere in your home. However, when choosing a
location ensure that the general instructions are followed. For best results, install out of direct sunlight.
Power supply service must be either completed or placed within the electric fireplace prior to finishing to
avoid reconstruction.
WARNING ! Keep drapery and other furnishings at least 3ft /0.9m from the front of the
electric fireplace.
FRAMING
·Choose a fireplace location and frame as shown in figure 2.
·Frame in the fireplace with a header across the top.
·It is important to allow for finished face when setting the depth of the frame.
·If a hearth system or raised hearth is to be installed, the unit MUST be raised to provide service access
and use of front.
·The fireplace can now be positioned in the opening.
·Level it with shims if necessary, and attach the unit to the frame using the fit brackets provided.
·Combustible or non-combustible materials may be used to finish up to the fireplace opening.
Note: Ensure that you leave adequate room to remove and replace the front screen or optional
front.
figure 2
4
W1
W2
855
895
1055
1095
1355
1395
1555
1595
1955
1995
W3
924
1124
1424
1624
2024
MODEL
DY-BT35
DY-BT44
DY-BT55
DY-BT63
DY-BT79
unit: mm
W
D
H
928
180
495
1128
180
495
1428
180
495
1628
180
495
2028
180
495