Autopilot APCETHD Manual - Página 12

Navegue en línea o descargue pdf Manual para Controlador Autopilot APCETHD. Autopilot APCETHD 18 páginas.

Imprimir página
Page 11
APCETHD
Q & A
What if my temperature is reading high? Make sure the remote
probe is not in direct lighting from HID lights or sunlight.
Do I need to calibrate my humidity sensor? No. like the
temperature sensor, the humidity sensor is digital and does not
require calibration.
SEn? The remote probe is not
Why is the display reading
Err
connected and/or communicating with the controller. Check the
quick-connect cable and that the remote probe is getting power.
*Contact the factory for more info.
What if one of the small green Error LEDs are on? One or
more environmental conditions are not acting correctly. Refer to
the Error LEDs sections to diagnose the problem.
What if the CO2 timer is not keeping correct time? The battery
may need to be replaced. The lithium battery has an average life
of 5 years. Battery is a lithium CR1220 3 volt.
What if there is no power? Reset the power switch (circuit
breaker). If this continues reduce the number of devices
connected or use a power multiplier / expander to control devices
with larger amperage.