Galileo Quark SoC X1000 Manual de introducción - Página 13

Navegue en línea o descargue pdf Manual de introducción para Hardware informático Galileo Quark SoC X1000. Galileo Quark SoC X1000 20 páginas.

Last, but not least, to update the board firmware go to Help > Firmware Update. Then click Yes to

proceed.

The software will attempt to communicate with your board, and read the current version of the

firmware. On the next window that pops up, select Yes to acknowledge that you'd like to upgrade the

firmware, and the process will begin.

While the progress bar zooms across your screen, make sure you don't unplug either power or

USB from the Galileo. As the pop-up says, the update procedure will take about five minutes. A

Target Firmware Upgraded Successfully pop-up will appear after the update completes.

Uploading Blink

As always, the first program to be uploaded to a board is the "Hello, world" of microcontrollers -

Blink.

To open the Blink example, go to the File > Examples > 01.Basics > Blink.

language:c

Blink

Turns on an LED on for one second, then off for one second, repeatedly.

This example code is in the public domain.

// Pin 13 has an LED connected on most Arduino boards.

Page 13 of 20