DCN WL8200-I2 Manual de instalación rápida

Navegue en línea o descargue pdf Manual de instalación rápida para Punto de acceso inalámbrico DCN WL8200-I2. DCN WL8200-I2 9 páginas.

4. Object of the declaration (identification of the radio equipment allowing traceability; it may

include a colour image of sufficient clarity where necessary for the identification of the

radio equipment):

5. The object of the declaration described above is in conformity with the relevant Unionharmonisation

legislation:

Directive: 2014/53/EU

Other Union harmonisation legislation where applicable: Not Applicable

6. References to the relevant harmonised standards used or references to the other

technical specifications in relation to which conformity is declared:

Article 3.2: EN 300 328 V2.1.1, EN 301 893 V2.1.1

Article 3.1b: DraftEN 301 489-1 V2.2.0; DraftEN 301 489-17 V 3.2.0

Article 3.1a Health: EN 62311:2008

Article 3.1a Electrical Safety: EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013

7. Notified Body Name: Phoenix Testlab

Notified Body Number: 0700

Notified Body Assessment Performed: Module B on Article 3.1a, 3.1b and 3.2

EU-type examination certificate Number: N/A

8. Where applicable, description of accessories and components, including software, which

allow the radio equipment to operate as intended and covered by the EU declaration of

conformity: User instructions are provided in the User Manual. Firmware update via smart

device as instructed, however Firmware update does not affect RF parameters.

9. Additional information: Hardware Version:

Signed for and on behalf of:

Certification Holder: Yunke China Information Technology Limited

Digital Technology Plaza, No.9 shangdi 9th street, Haidian District Beijing China

(place and date of issue): 2017/8/8

(name, function): Dina Li (signature): Dina Li

All specifications are subject to change without further notice. All features with * mark will be available by firmware upgrade.

2.0.1,

Software Version: 3.3.2.11

Page 13 of 13