Dynatech ASG-UD Series Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Dynatech ASG-UD Series. Dynatech ASG-UD Series 11 páginas.

INSTRUCTIONS: REPLACEMENT/SAFETY GEAR; Code: DYN 32.03.00

Date: 29/06/2016

Revision: 00

1 BACKGROUND

Dynatech equipment is assembled according to customer specifications, so handling is not necessary. If the

shoe needs to be replaced, Dynatech offers customers this manual for the proper conduct of this work.

However, under no circumstances will Dynatech be held responsible for any error or deterioration in the

equipment following handling by non-Dynatech personnel, even if they follow the manual instructions.

Dynatech or your nearest dealer must be contacted for the replacement shoes, according to the

necessary guide rail width.

The following details must be provided:

Safety gear model

New guide rail width (to select replacement shoe)

Series number

There are three safety gear types of this model, depending on the thickness of the shoe assembled. The

safety gear types refer to the guide rail centre position in relation to the frame attachment holes, which are in

accordance with the measurement recommended in the safety gear (DYN.32) usage and maintenance

instructions. Thus, the gap between the shoe and guide rail established by Dynatech is observed.

TYPE

THICKNESS (mm)

The steps for replacing the shoe to change the thickness are as follows:

1. The following must be available:

Replacement shoe: with the new guide rail thickness.

Stickers with the new guide rail thickness.

7-8-9-10

11-12-13

14-15-16