Dynatech STAR Manual de instrucciones de uso y mantenimiento - Página 12
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Equipamiento industrial Dynatech STAR. Dynatech STAR 18 páginas. Overspeed governor
Imprimir páginaINSTRUCTIONS: Star Cod: DYN 09.1.19
Date: 14/12/2022 Revision: 19
4.7 HARDENED GROOVE
It is possible to order the governor with a hardened groove. The following data is provided to assess whether or not
ordering the governor with this option is required.
Non-hardened groove: 500000 cycles
Hardened groove: 1500000 cycles
Note: This data is the result of tests performed on Dynatech premises and are for illustrative purposes only. The
wear depends on the type of installation, traffic, tension on the governor rope, speed, etc.
The client must decide whether or not to select this option depending on the type of installation.
4.8 CURRENT RECTIFIER
There is the option of requesting the Star governor with a current rectifier attached. This option is related to remote
tripping and the parking system.
As the coils of these 190Vdc devices are coupled to the rectifier, the customer need do no more than connect the
rectifier to the 230Vac mains.
The rectifier is a device which converts alternating current to direct current, which allows the current coil to continue
working.
5 STAR PLUS
The Star governor moves with the lift's car, therefore following the car's movement.
Star Plus is a Star governor model that comes ready to house an encoder.
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer
area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/
As seen in the figure, the encoder is mounted on the diverting
pulley's shaft.
10