Dynatech STAR A3 BETA Manual de instrucciones de uso y mantenimiento - Página 5
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Controlador Dynatech STAR A3 BETA. Dynatech STAR A3 BETA 9 páginas. Ucm unit
También para Dynatech STAR A3 BETA: Manual de instrucciones de uso y mantenimiento (9 páginas)
Imprimir páginaSD-Box + Star A3 Beta+ ASG 1XX + T-25 Instruction Manual
Code: DYN 62.06.00
Date: 25/02/2020
•
When a UCM occurs, a qualified technician is required for the installation to be operative again. Once the
problem causing the UCM has been solved, the RESET button must be pressed in order to restore the safety
line and for the system to be operative again.
•
SD-BOX´S input signals are typical of the installation controller. As a result, response times of the controller
components are inherent to it even though the total response times of the SD-BOX + Star A3 Beta+ ASG
1XX + T-25 unit are considered as standard.
•
In the case of checking the installation or carrying out a manual rescue, it must be checked that the SD-BOX
is set at the correct operation mode for each of these situations so as to prevent unwanted jamming in the
safety gears.
•
The parking or anti-creep system, Beta model, incorporated in the Star governor to detect uncontrolled
movements, must always include a 24V coil in order to operate correctly along with the SD-BOX.
•
Connection between the STAR governor's star and ASG safety gear must be designed for this purpose in
order to prevent increasing response times.
DESCRIPTION OF THE UNIT
COMPONENTS OF THE SYSTEM
The components making up the system are:
•
CONTROL SYSTEM
The SD-BOX operates as a control systemSD-BOX´SSD-BOXSD-BOXSD-BOX´S.
•
GOVERNOR
The Star A3 model two-way governor operates as a UCM actuator.
SD-BOXSAFETY GEAR AND STEERING MECHANISM
The two-way progressive safety gear model ASG-1XX/ASG-1XX UD is used as a braking means.
OPERATION AS A UNIT
As can be seen in FIGURE 2, the SD-BOX electronic device is connected to the installation controller and the Star
A3 governor's parking system. SD-BOX connection is described in the SD-BOX´S manual for use and maintenance.
The Star A3 overspeed governor with Beta parking system is fitted in the lift's car or frame and moves together with
them. Therefore, the governor in the machine room and the diverter pulley in the pit can be eliminated. The governor
moves whereas the rope remains fixed attached to the pit via a tensioning system.
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer
area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/
Revision: 00
3