Gallagher TWR-1 Manual de inicio rápido - Página 9
Navegue en línea o descargue pdf Manual de inicio rápido para Scales Gallagher TWR-1. Gallagher TWR-1 16 páginas. Weigh scale unit
Imprimir página
Gallagher TWR-1 Weigh Scale Quick Start Guide
START A SESSION
When you gather information about an animal, it is recorded in a Session. Each
event such as weighing, adds a record to the current session.
A template using pre-determined defaults can be set up and used each time you
start a new session.
Note: It is recommended a new session is opened for a new day's activity or for
a new group of animals. An animal cannot appear within the same session more
than once.
To start a new weighing session:
1.
From the Home screen, tap
displayed.
Quick Start
2.
Tap
Note: To set up and use templates, refer to the TWR-1 On-board Help.
Note: Before weighing,
3.
Load the animal onto the platform.
4.
If using the internal reader, the animal's Electronic ID will be scanned, or you
can scan with a hand-held reader and record the animal's Visual Tag Number.
Note: The internal reader will only read a tag when loadbars are connected
and weight is detected on the weighing platform.
5.
If weighing in
weight and hold it on the screen until the animal leaves the platform.
If weighing in
When the weight becomes stable, it will lock.
6.
Move the animal off the platform.
Important: If the weight displayed does not always return to
check for dirt or manure that may have been left on the platform.
The TWR-1 can be re-zeroed by pressing
New
to open the Weigh screen with the scale default settings.
0.0
should be displayed. If not, press
AUTO
- Automatic weight lock, the scale will lock on to the
MAN
- Manual weight lock, you must first press
.
The New Session screen is
To customize the session:
click on the
button at the lower left of
the screen. Here you can
set up the weighing mode,
drafting options and name
for the session. Refer to
Session Options
more information.
.
OPTIONS
(p. 11)
for
.
Weigh
.
0.0
after weighing,
9