AFINIA LABEL L801 Manual - Página 4

Navegue en línea o descargue pdf Manual para Etiquetadora AFINIA LABEL L801. AFINIA LABEL L801 6 páginas. By vivid
También para AFINIA LABEL L801: Boletín de servicio técnico (4 páginas)

Imprimir página

Before washing the service tray and components out in the sink.

holster and set it to the side because the roller can not be washed. The microfiber roller can not be

washed because it can lose its shape after being washed and dried out.

washed with a spray bottle that contains distilled water – angle the holster over a trash can and spray

the silver roller so all the ink runs down and into the trashcan until the ink is no longer running out of the

holster. Be sure to keep your hand over the silver roller to ensure that it does not come out of position.

Pat down the holster with a dry towel or cloth to absorb any left-over moisture.

The parts that can be washed in the sink are: Print Cap, Print Platen and Tray. In the

picture below they are designated by a green circle. Do not wash the PCB board that

connects to the back of the service station and do not wash the Microfiber Roller. As

you can tell the Print Cap, Print Platen and Tray all have built up ink that has collected

Figure 4. Parts that can be washed in the sink (Platen, Cap & Tray) are marked with green dots.

For additional support call the Vivid Data Group Support Team at 1-855-848-4332- and select Option 2

Figure 3. Remove microfiber roller from holster.

Remove the microfiber roller from its

The holster needs to be

over time.