DCS CT-365BK Manual de uso y mantenimiento - Página 8
Navegue en línea o descargue pdf Manual de uso y mantenimiento para Campana de ventilación DCS CT-365BK. DCS CT-365BK 18 páginas. Professional 5 burner 36” drop-in cooktop
También para DCS CT-365BK: Manual de instalación (20 páginas), Manual de instalación (15 páginas)
Imprimir página
COOKTOP USE
ELECTRONIC IGNITERS:
ffa burner does not light or re-ignite, listen for the clicking
sound, flail the igniters are not clicking, turn
off the burner. Check the circuit pane[ for a bHown fuse or a tripped
circuit breaker. If one burner is not
lighting, see page 9 for cleaning instructions.
BURNER EFFICIENCY:
Ht i s necessary to keep the burner ports and the igniters dean for proper lighting and efficient performance.
The burner flame should
burn completely
around
the burner with
no excessive noise or lifting. The
flame should be blue in color and stable with no yellow tips.
CT-365
CT-304
Burner
Location
1,2,4,5
3
MAX.
Btu/hr
NAT
LP
11,000
10,000
17,500
15,000
LOW
Btu/hr
NAT & LP
3,000
3,000
SIMMER
Btu/hr
NAT& LP
1,200
1,200
FLAME HEIGHT:
Cabinet
front
Burner
Location
1
2,3
4
MAX.
_W
Btu/hr
Btu/hr
N_
LP
N_ & LP
10,000
10,000
3,000
11,000
10,000
3,000
15,500
15,000
3,000
©
SIMMER
Btu/hr
NAT & LP
1,200
1,200
1,200
]-
IL
Z:---I
@
Cabinet
front
The correct height of the flame mainly depends on the size of the bottom
of the cooking
utensil, the
material of the cooking
utensil, the amount
and type of food and the amount of liquid in the utensil
Following are some basic rules for selecting
flame height.
[] For safety
reasons
the flame
must
never extend
beyond the bottom
of the cooking
utensil
[] Never allow flames to cur[ up the side of the pan.
[] Utensils which
conduct
heat slowly (such as glass _
ceramic) should be used with medium
to low flames.
If you are cooking
with
a large amount
of liquid a
slightly
larger flame can be used.
PROPER FLAME HEIGHT
BURNER GRATES:
The cast iron burner grates are fully porcelain
coated for long
life and rust prevention.
HFTemperature
cushions
allow
the
grate to rest softly on the cooktop
without
scratching. The
grates are designed
for easy sliding of pots across the grate
tops.They were designed
in interlocking
sections to make them
safer, easier to remove and dean. For additional
cleaning
tips
see the care and maintenance
section.