DCS DCS-VH-36S Manual de uso e instalación - Página 8
Navegue en línea o descargue pdf Manual de uso e instalación para Campana de ventilación DCS DCS-VH-36S. DCS DCS-VH-36S 18 páginas. The professional vent hoods
Imprimir página
INSTALL VENT HOOD INTO SOFFIT
At this point in the installation process, the inner liner should be removed from the Hood and set aside
(see-Pgs 5 & 6).With the liner set aside, there is clear access to the Soffit mounting holes and wall
mounting holes in the rear panel of the unit.
Once the soffit framing has been completed, place assembled vent hood (hood, rough-in kit, and
ventilator) into place and secure hood to the soffit frame with 6 wood screws.
NOTE: Additionally, we recommend the installer utilize the holes provided in the rear panel of the hood to
secure the hood to the rear wall and minimize any noise and vibration of the unit.
NOTE: Assure that the mounting screws are long enough to be driven through the wood shims into the
installed 2" x 4"s for total support. -see fig.3
-GO TO FINISHING THE INSTALLATION- Pg. 9
FIG.03
2 x 4's
installed per
Fig. 1
3/8" Soffit
mounting
holes in
Vent Hood
(6 total)
TOP VIEW (48" MODEL SHOWN)
"B"
"B"
Rough-in Kit
(23-1/2 x 10-1/2")
ALL MODELS
FRONT VIEW
"A"
Rough-in Kit
Soffit Mounting Screws (6)
7
12"
25"
2 x 4's in Soffit
Outer 2 x 4's
(48" Models only)
CEILING DRYWALL