Dynaudio Loudspeakers Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Altavoces Dynaudio Loudspeakers. Dynaudio Loudspeakers 18 páginas.

Fig. 1

Binding posts at rear of cabinet (example).

Owners Manual

Connecting

1. Connect a two-pole (+/-) loudspeaker cable to the binding posts, located at rear of the

cabinet (see Fig. 1). The high quality, gold plated binding posts can accommodate

different connection systems:

–

4.0 mm banana plugs:

any tightening necessary.

–

Cable spades:

Un-tighten the binding posts, insert the spade into the opening, and

secure the spade by tightening the posts.

–

Bare wires:

Un-tighten the binding posts and place the cable into the binding

posts. Tighten the posts.

Note

• With every connection system, ensure that the contact is tight and has a proper

contact area.

• Connectors with similar gold plating as binding posts will typically offer the best

results and remain corrosion-free.

• Please ensure that the positive and negative cables do not make contact with each

other. Tighten the posts, and check the contact after a few days to make sure that it

hasn't loosened.

The pins can be put directly into the binding post without

Connecting