Dynaudio 18S Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Subwoofer Dynaudio 18S. Dynaudio 18S 15 páginas. Active dsp subwoofer

Imprimir página

In use

Once installed and configured, your

18S should require little attention other

than perhaps occasional volume control

adjustment to suit different types of

programme material.

Cleaning your subwoofer

Bush the grille surfaces with a soft brush

and the cabinet surfaces with a clean

lint-free cloth. Do not use a vacuum

cleaner. If you wish to use a cleaning

agent, apply it to the cleaning cloth

and not directly to the subwoofer. Test

a small area first, as some cleaning

products may damage some of the

surfaces.

Support

Should you require help or advice there

are a variety of support options for

Dynaudio products. These can be found

at dynaudio.com.

Data

18S

System

Twin opposed driver, closed box, active DSP subwoofer

Frequency response

20Hz – 230Hz ±3dB

Inputs

2 x balanced XLR, 2 x unbalanced RCA phono

Max. input voltage

1.01Vrms @ +6 dB Sensitivity, 2.0Vrms @ 0 dB Sensitivity

4Vrms @ -6 dB Sensitivity, 10.1Vrms @ -14dB (LFE) Sensitivity

Outputs

2 x balanced XLR, 2 x unbalanced RCA phono

XLR output impedance

Differential: 200Ω, Single-ended: 100Ω

Phono output impedance

100Ω

XLR Pin-out

Pin 1: ground, Pin 2: signal +, Pin 3: Signal –

Auto ON/OFF

Yes

Amplifier power

500W

Power consumption (standby)

<0.5W

Power consumption (max)

650W

Driver

2 x 24cm

Weight

20.5kg

45.2lb

Dimensions (W x H x D)

470 x 333 x 268mm

18.5 x 13.1 x 10.6in

In use