CoPOS CoTERM Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación CoPOS CoTERM. CoPOS CoTERM 6 páginas.

CoTERM is a computing device that acts as the interface between a CoPOS Server and CoPOS stations. CoTERM offers a

complete replacement for Logic Box Terminals. Up to 15 CoTERMs, or Logic Box Terminals, can be connected to a single CoPOS

Server simultaneously. Access to the CoTERM is done through CoTERM Controller.

What is CoTERM Controller?

The Controller is the software that controls CoTERM, performing functions such as rebooting or powering it off.

CoTERM is accessed by using the following key combination:

Ctrl + Alt + F2 – Toggles from CoPOS to CoTERM Controller

To return to the CoPOS controller,

Ctrl + Alt + F1 – Toggles from CoTERM Controller to CoPOS

Preparation for Setup

Update the CoPOS Server controller to the latest version

Note: The CoPOS Server must have an Internet connection.

1. Navigate to the CoPOS controller (Ctrl + Alt + F1)

2. Select "4 Upgrade"

3. Select "2 Update Controller"

4. Wait for operation to finish.

5. In the CoPOS controller, navigate to the "4 Upgrade" menu.

6. Select "3 Update Kernel"

o If the CoPOS Server displays the message "This CoPOS Server is already running the newest kernel," then no further

steps are necessary.

o If the server isn't running the most current kernel, the CoPOS Server will guide you through installing the Kernel

Update. When finished, the server will reboot.

Obtain CoTERM Key from the CoPOS Server

A CoTERM Key is a computer file that is unique to each CoPOS Server. Before each CoTERM can be connected to the CoPOS

Server, the CoTERM Key must be transferred from the server to CoTERM. This is done manually using USB Storage, e.g.,

flash drive, thumb drive... If this is the first time connecting this CoTERM, a key will

need to be generated.

1. Insert the USB Storage into the server. Verify that the CoPOS Server displays

"USB Storage is available" on the screen or LCD.

2. Navigate to the CoPOS Controller (Ctrl + Alt + F1)

3. Select "8 CoTERM"

4. Select "2 Keys"

5. Select "1 Copy Key to USB"

6. Select "Copy Key"

7. Then press "OK"

o If the screen says "Key Copied," press enter. You may now remove the USB storage device from your CoPOS Server.

o If the screen did not say "Key Copied," either disconnect and reinsert the USB storage device, or try a different USB

storage device, and retry the above steps.

o If this is the first time

8. Remove USB storage device from server.

o This USB storage device can be reused to transfer CoTERM Key to every CoTERM connected to the CoPOS Server. We

recommend maintaining a single CoTERM Key on a USB storage device, clearly labeled and placed in a secure location.

February 1, 2019

CoTERM User Guide