HighPoint SSD7103 Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Controlador HighPoint SSD7103. HighPoint SSD7103 11 páginas. Linux ubuntu desktop 19.10
También para HighPoint SSD7103: Manual de instalación (11 páginas), Manual de instalación (11 páginas), Manual de instalación (15 páginas), Manual de instalación (12 páginas), Manual de instalación (12 páginas), Manual de instalación (12 páginas), Manual de instalación (13 páginas), Manual de instalación (11 páginas), Manual de instalación rápida (9 páginas), Manual de instalación (12 páginas)

SSD7103 Controller Windows Installation Guide

1 Overview

The purpose of this document is to provide clear instructions on how to install and use

SSD7103 RAID Controller on Windows system.

2 Installing Windows on SSD7103 RAID Controller

If you would like to install Windows onto drives attached to SSD7103 RAID Controller, please

perform the following operations:

Step 1 Prepare Your Hardware for Installation

After you attach your NVMe SSD to SSD7103 controller, you can use SSD7103 UEFI Utility to

configure your NVMe SSD as RAID arrays, or just use them as single disks.

Before installation, you must remove all the disk drives, which are not physically attached to

SSD7103 RAID controller, from your system.

Note

SSD7103 only support UEFI boot .

the SSD7103 controller UEFI will be loaded firstly. If not, try to move it to another PCI slot.

Otherwise you may be unable to boot up your system.

Step 2 Check System UEFI Settings

Set UEFI setting with SuperMicro X11DAi-N motherboard as an example.

Set "Boot Mode Select" to "UEFI";

If you have other SCSI adapters installed, you must make sure

2/11