DD Audio DSI-2 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Procesadores de señales DD Audio DSI-2. DD Audio DSI-2 14 páginas.

INPUT CONNECTION

+12V:

Connect to 7.5V-17.5V constant positive power

supply input.

-GND:

Connect to a verified chassis ground.

Run a separate ground wire vs connecting it to a

factory ground wire. Factory ground wires

usually have multiple devices connected to them

and are not recommended because this can

lead to ground loop issues.

REM IN:

Connect to switched +12V turn-on power input.

REM OUT:

Provides a >500mA 12v switched

turn-on signal for connected amplifiers.

May require an additional relay for multi

amp turn-on.

IN1-IN4:

Connect to hi-level (speaker level) inputs for

integrating into OEM audio systems.

TURN-ON Switch:

Used to select the desired DSI-2 turn-on method.

REM=REM IN +12v, SPK=High level CH1-CH4

input (signal sense), RCA=RCA INPUT CH1-CH4

(signal sense).

PWR LED:

When illuminated indicates the unit is powered on.

BLUETOOTH:

Port for connecting the optional Bluetooth

interface dongle.

REMOTE:

Port for connecting the optional remote control via

modular cable.

PC CONTROL:

USB (type B) Port for connecting a PC to the

DSI-2 via USB Cable.

DD AUDIO / DSI-2 /