HighPoint SSD6540 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Recinto HighPoint SSD6540. HighPoint SSD6540 15 páginas. 4-bay u.2 nvme raid enclosure
También para HighPoint SSD6540: Manual de instalación rápida (11 páginas)
Imprimir página
Enclosure Setup
1.
Insert the Controller card into a PCIe x16 slot in your system.
2.
Place the SSD6540 enclosure on a level surface and remove each
disk tray.
Carefully insert the 2.5" disk into each disk tray and secure them
3.
with the provided mounting screws.
4.
After installing the hard drives, connect the SSD6540 to a power
source.
With the power cord connected to the power source, turn on the
5.
SSD6540 using the power button on the rear panel (click the
button to power on the SSD6540).
6.
Connected the SSD6540 to the Controller Card with the HD mini-
SAS cable.
Setting up the SSD6540
1.
Install the RAID Management software.
1)
Download the RAID Management Software (WebGUI) from
HighPoint Website:
http://highpoint-tech.com/USA_new/series-ssd6540-download.htm
2)
Extract the package and double Click the Installation program
to start installing the WebGUI
3)
Follow the
procedure.
2.
Driver Installation for Windows
1)
Boot up the Windows operating system.
2)
Download the Windows driver package from the HighPoint
website:
http://highpoint-tech.com/USA_new/series-ssd6540-download.htm
3)
Extract the package and click the setup.exe program to install
the driver. The installation program will install the SSD6540
Driver, automatically.
on-screen instructions to complete the installation
5