Emerson FB1200 Manual de sustitución de la placa de terminación - Página 7

Navegue en línea o descargue pdf Manual de sustitución de la placa de terminación para Accesorios Emerson FB1200. Emerson FB1200 18 páginas. Flow computer coin cell battery field
También para Emerson FB1200: Manual de sustitución (18 páginas), Manual de sustitución sobre el terreno (14 páginas), Manual de sustitución sobre el terreno (20 páginas), Manual de sustitución sobre el terreno (8 páginas), Manual de sustitución sobre el terreno (8 páginas), Manual de sustitución (8 páginas)

FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide

Removing/Replacing the Termination Board

UL Listed Termination board Field Installed Accessory Kit for Use in Class I, Division 1,

Groups C, D; Class I, Division 2, Groups A, B, C, D

Flow Computer Termination Board Field Installed Accessory Kit Part No. 399185-01-1



for use with UL Listed Model Series FB1100.



Flow Computer Termination Board Field Installed Accessory Kit Part No. 400216010-

KIT for use with UL Listed Model Series FB1200.

To replace the termination board, you first need to remove the battery enclosure/HMI

module assembly to gain access to the termination board screws on the inside of the

flow computer.

1. Remove the front and rear end caps. Remove the retaining clamps on the end caps

(if present) using a 3 mm hexagonal wrench.

Components of Retaining Clamp Assembly

2. Grasp the end cap.

Front End Cap

Screw

Retaining Clamp

Washer

Rear End Cap

D301820X012

March 2018