Emerson FB1200 Manual de sustitución - Página 12

Navegue en línea o descargue pdf Manual de sustitución para Accesorios Emerson FB1200. Emerson FB1200 18 páginas. Flow computer coin cell battery field
También para Emerson FB1200: Manual de sustitución de la placa de terminación (18 páginas), Manual de sustitución sobre el terreno (14 páginas), Manual de sustitución sobre el terreno (20 páginas), Manual de sustitución sobre el terreno (8 páginas), Manual de sustitución sobre el terreno (8 páginas), Manual de sustitución (8 páginas)

Imprimir página
Emerson FB1200 Manual de sustitución
FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide
D301820X012
November 2020
16.
17.
18.
Removing/Replacing Pluggable Terminal Blocks
UL Listed Terminal Block Field Installed Accessory Kit for Use in Class I, Division 1, Groups C, D;
Class I, Division 2, Groups A, B, C, D
If one or more terminal blocks becomes damaged, you may need to replace them.
10
Tighten the screws that you loosened in Step 12. Torque screws to 6 in-lbs (0.7 N-m).
Take the battery pack enclosure/HMI module assembly you removed in Step 8. Being
careful to keep the battery wire and its connector free, carefully slide the assembly into
the front of the housing so that the HMI module mates with the green and yellow
connector from the CPU module. Tighten the screws to hold the assembly in place.
Torque screws to 6 in-lbs (0.7 N-m). If battery-powered, re-connect the battery.
You can now proceed to rewire all connections (I/O, communications, grounding) to the
flow computer. Please refer to the instruction manual for wiring installation instructions.
Flow Computer 6-connector pluggable terminal block Field Installed Accessory Kit Part
No. 395791014-KIT for use with UL Listed Model Series FB1100.
Flow Computer 8-connector pluggable terminal block Field Installed Accessory Kit Part
No. 395803000-KIT for use with UL Listed Model Series FB1200.
For 6-connector terminal blocks you need a 1/8 inch flat head screwdriver.
For 8-connector (or 9-connector) terminal blocks you need a 3/32 inch flat head
screwdriver.