DDC Sentry VOIP V2 Manual - Página 12

Navegue en línea o descargue pdf Manual para Teléfono DDC Sentry VOIP V2. DDC Sentry VOIP V2 20 páginas.

System Settings

For some installation, it may be required to record events that occur at the phone.

These events may include;

which button is pressed

when a relay is activated remotely

when the handset is on or off hook

on ringing (incoming call)

system reboot

start of call and at auto answer

at the end of a call

and a status of it's current state, ie Logged-on or not at set intervals.

This information is stored at an allocated server and the protocol used is SYSLOG. Although

generally on a Linux and Unix systems, SYSLOG programmes can be sought for the Windows

system as well.

Each event is timed stamp with the phone ID and IP address. To enable this function set the

IP of the SYSLOG enabled server and the intervals into the next 2 fields.

The DDC_VoIP phone outputs general debugging information on a continuous basis, If high

traffic is a concern then set the Enable Debug output option to No.

The SNTP Server (simple network time protocol) provides 'time of day' that is uses by the unit

for sysloging events. Most PC on the network with port '123' open on the firewall will do this or if

Dallas Delta Corporation Pty.Ltd.

continue.

Page 12