HighPoint RocketStor SMART RAID Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Almacenamiento HighPoint RocketStor SMART RAID. HighPoint RocketStor SMART RAID 20 páginas.

Logical Device Information – This section displays information about the devices and arrays you have

configured.

Name - The name assigned to each hard disk/SSD by the RocketStor hardware

Type - The RocketStor will classify the storage device as either Hard Disk or SSD (if not configured into an

array), or by the RAID type (RAID 0, 1 or JBOD).

Capacity - The total capacity of the storage device or RAID array

OS Name - The name OS X has assigned to the device.

Status - The current status of the storage device or array.

Unplug – You can use this function to safely remove a configured Array.

Note: this function is separate from the RocketStor's Hot-Plug and Hot-Swap features. Unplug is

not needed for non-RAID configurations.

RocketStor SMART RAID – displays information about the hard drives or SSD's you have installed into

the RocketStor device.

Location: The physical location of the Hard Disk or SSD (RocksetStor SMART RAID bay)

Model: The model name of the Hard Disk or SSD

Capacity: The total capacity of the Hard Drive or SSD

Status: The operating status of the Hard Disk or SSD (Normal/Disabled)

4.3 Event

Event – This section chronicles all events related to the RocketStor SMART AID. Events include the

creation and deletion of arrays, hot-plug/hot-swap actions (show below), and device or array warnings and

failures.