CopperOptics PairGain PRL-771 Manual - Página 11
Navegue en línea o descargue pdf Manual para Mando a distancia CopperOptics PairGain PRL-771. CopperOptics PairGain PRL-771 18 páginas. Pg-plus remote line unit
Imprimir página950-771-100
2
Use a pencil to punch a small hole in the bottom of the rubber grommet on the left-hand bottom
side of the PRL-771 RT enclosure (Figure 7).
3
Insert the frame-ground wire into the PRL-771 RT enclosure through the pencil hole made in
step 1. A 10 AWG copper frame ground wire is recommended.
4
Loosen and remove from the ground-binding post the top nut and three flat washers.
5
Loop the frame-ground wire around the ground-binding post, then replace and tighten the
hardware removed in step 4, in reverse order.
PG-Plus PRL-771
March 14, 1997
Figure 7. Attaching the Frame-Ground Wire
PairGain Engineering - Plant Series
Revision 01
Page 9