Gallien-Krueger 2001RB Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Amplificador Gallien-Krueger 2001RB. Gallien-Krueger 2001RB 15 páginas. Bass amp and preamp
También para Gallien-Krueger 2001RB: Manual del usuario (20 páginas), Manual del usuario (20 páginas)
Imprimir página
Installation and Maintenance
Installation: To insure proper operation and to avoid
potential safety hazards, place the unit on a firm, level
surface. When installing the unit in a rack, be sure the
mounting hardware can support the amplifier's weight.
To save space in your rack, the 2001RB's feet can be
removed using a Phillips head screwdriver.
Ventilation: Make certain that proper space is provided
for ventilation. Never block the fan vent holes in the
rear or front of the amplifier. If the amplifier will be
installed in a rack or other enclosed area, make sure that
there is sufficient air movement within the enclosure to
allow proper cooling. Consult your dealer for more
information.
Avoid
installation
in
locations, and areas that are exposed to direct sunlight,
or near heating equipment. Avoid moist or humid
locations.
Remember, power amplifiers generate heat. The heat
sink fins and ventilation slots that form part of the
enclosure are specially designed to displace this heat.
Placing other electronic equipment near these heat
dissipation systems may possibly affect the long term
reliability of both your amplifier and the other
equipment.
Moving the Unit: Before moving the unit, be certain to
disconnect any cords and make sure that you disconnect
the unit from the AC outlet.
Cleaning: When the unit gets dirty, clean only with a
dry cloth. Never use benzene, thinner, alcohol, or other
volatile cleaning agents. Do not use abrasive cleaners,
as they may damage the finish of metal parts. Avoid
spraying insecticides near the unit.
Maintenance: Your new amplifier is rugged. It was
built to give you years of trouble free operation, if it is
operated in accordance with the instructions contained
in this manual. The only maintenance required is
cleaning. If you are going to move your amplifier
around frequently, we recommend a road case to
protect it from scratches and road wear.
2001RB
extremely
hot
or
cold
Speakon Cables: To make use of the 2001RB's Biamp
and Bridge mode features you will need to use a four
conductor Speakon cable to connect to a GK RBH or
NEO Series cabinet. This specially designed cable
carries the signals for both amplifiers (540W Woofer
Amps and 50W Tweeter Amps) to the speaker cabinet.
Below is a table describing the Speakon cable
connections to the 2001RB head.
Speakon Pin #
1+
540W Woofer Amp +
1-
540W Woofer Amp -
2+
50W Tweeter Amp +
2-
50W Tweeter Amp -
To obtain an additional 4 conductor Speakon cable for
use with the 2001RB please contact your local dealer or
contact GK directly.
10
Signal
Wire/Color
White
Black
Red
Green