Gallien-Krueger 2001RBP Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Amplificador Gallien-Krueger 2001RBP. Gallien-Krueger 2001RBP 20 páginas. Bass amp and preamp
También para Gallien-Krueger 2001RBP: Manual del usuario (20 páginas)
Imprimir página
Safety Information
Verify Line Voltage and Amperage Before
Use:
Your new 2001RB or RBP amp has been factory
configured for use with:
.
120 Volt/60Hz 15 Amp circuit for USA &
Canada.
.
230 Volt/50Hz 10 Amp circuit for Europe
& Australia.
. .
100 Volt/50Hz 15 Amp circuit for Japan.
Proper AC circuit for all other countries.
Connecting the amplifier to a line with specifications
other than indicated above can create a safety and
fire hazard, and may damage the amplifier. If you
have any questions about the voltage requirements
for your specific model, or about the line voltage in
your area, contact your dealer before plugging the
unit into a wall outlet.
Verify AC Circuit Capacity Before Use:
The high power output of your amplifier may require
heavy current draw under Full-Load conditions. To
insure proper performance and avoid potential safety
hazards, we recommend connection to line circuits
with amperage specified "as above". Connecting
multiple amplifiers to the same circuit, or connecting
the amplifier to the same circuit used by other heavy-
power devices, such as high-wattage lights, may cause
circuit breakers to trip. It is always a good idea to
avoid using any audio equipment on the same AC
circuit as equipment with motors, such as air condi-
tioners or refrigerators. This will lessen to possibility
of power variation and electrical start-up noise
affecting your sound.
2001RB & 2001RBP
Do Not Use Extension Cords:
To avoid safety hazards, use only the power cord
supplied with your unit. If a replacement cord is
used, make certain that it is of consistent quality and
gauge as the original. We do not recommend using
extension cords with this product. As with all electri-
cal devices, do not run power cords under rugs or
carpets or place heavy objects on them. Damaged
power cords should be replaced immediately with
cords meeting factory specifications.
Handle The AC Power Cord Gently:
When disconnecting the power cord from an AC
outlet, always pull the plug, never pull the cord. If
you do not intend to use the amplifier for a consider-
able length of time, disconnect the plug from the AC
outlet.
Do Not Open The Amplifier Enclosure:
There are no user-serviceable components inside this
product. Opening the amplifier enclosure may
present a shock hazard, and modification to the
product will void your warranty. If liquid enters the
unit, or any metal object such as a paper clip, wire, or
staple accidentally falls inside the enclosure, discon-
nect the unit from the AC power source immediately
and consult an authorized service station.
Unpacking:
The carton and packing materials used in shipping
your new amplifier were specially designed to cushion
it from the shocks and vibration that occur during
transport. We suggest that you save the carton and
packing materials for use in shipping, in the event
you move, or the amplifier needs repair.
5