Gallien-Krueger MB FUSION Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Amplificador Gallien-Krueger MB FUSION. Gallien-Krueger MB FUSION 12 páginas.
Imprimir página
Safety Information
Please read all enclosed safety precautions before
connecting or operating this product.
Verify Line Voltage and Amperage: Your new
MB Series Bass amplifier has been factory
configured for use with the specific line voltage
for your location:
120 Volt/60Hz 15 A circuit for USA/Canada.
230 Volt/(50/60Hz) 10 A circuit for
UK/Australia.
230 Volt/(50/60Hz) 10 A circuit for Europe.
100 Volt/50Hz 15 A circuit for Japan.
220 Volt/50Hz 10 A circuit for Korea.
Proper AC circuit for all other countries.
Connecting the amplifier to a line with
specifications other than indicated above can
create safety and fire hazard, and may damage
the amplifier. If you have any questions about
the voltage requirements for your specific model,
or about the line voltage in your area, contact
your dealer before plugging the unit into a wall
outlet.
Verify AC Circuit Capacity Before Use: The high
power output of your amplifier may require
heavy current draw under full-load conditions.
To insure proper performance and avoid potential
safety hazards, we recommend connection to line
circuits with amperage specified "as above".
Connecting to the same circuit used by other
heavy-power
devices, such as high-wattage
lights, may cause circuit breakers to trip. It is
always a good idea to avoid using any audio
equipment on the same AC circuit as equipment
with motors, such as air conditioners or
refrigerators. This will lessen the possibility of
power variation and electrical start-up noise
affecting your sound.
PLEASE REFER TO PAGE 10 FOR MORE
INFORMATION TO SAFELY INSTALL
THIS ITEM
MB FUSION
AC Power Cord: To avoid safety hazards, use
only the power cord supplied with your unit. If a
replacement cord is needed, make certain to use
a standard IEC compliant cord. Damaged
power cords should be replaced immediately.
When setting up, make certain that the AC plug is
easily accessible. If you do not intend to use the
amplifier for a considerable length of time,
disconnect the plug from the AC Mains Socket.
Do not use an extention cord.
Earth Grounding Connection: To prevent
electric shock, do not remove the grounding plug
on the power cord, or use any plug or extension
cord that does not have a grounding plug
provided. Make certain that the AC outlet is
properly grounded as well. Do not use an
adapter plug with this product.
Do Not Open the Amplifier Enclosure:
There are no user serviceable parts inside this
product. Opening the amplifier enclosure may
present a shock hazard. Modification to the
product will void your warranty. If liquid
enters the unit, or any metal object such as a
paper
clip
enclosure, disconnect the unit from the AC power
source immediately and consult an authorized
service station.
Setup: To insure proper operation and to
avoid potential safety hazards, place the unit on a
firm, level surface. Do not plug or unplug the
instrument or speaker cable while the amplifier
power is on.
Speaker Cables: To prevent electric shock, use
"Class II Wiring " speaker cables or cables with
double or reinforced insulation when connecting
to speaker cabinet.
Heat & Ventilation: Make sure there is space
provided for proper ventilation. Avoid
using in extremely hot or cold locations and
areas that are exposed to direct sunlight or near
heating equipment. Avoid using in moist or high
humidity areas.
NEVER BLOCK THE FAN VENT
HOLES ON THE SIDES OF THE UNIT
4
accidentally
falls
inside the