Gallien-Krueger MB500 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Amplificador Gallien-Krueger MB500. Gallien-Krueger MB500 12 páginas.
También para Gallien-Krueger MB500: Manual del usuario (12 páginas)
Imprimir página
F U L L P O W E R
5 8 0 W
A C I N P U T
1 2 0 V / 6 0 H z
1
Rear Panel Features
1
AC Receptacle: The detachable power cord
plugs in here.
2
Ground Lift: This switch disconnects the
ground of the balanced, XLR output to eliminate
hum and buzz when connecting to equipment
that is running on a different ground system.
3
Balanced Direct Out: This electronically
balanced output allows a direct connection to a
P.A. system.
4
Pre/Post EQ Button: This button switches the
direct out signal to be before or after the EQ.
5
Foot switch Input: A foot switch is provided to
engage Boost and Master B modes.
6
Tuner Output: This output comes directly off of
the input stage and can be patched to a tuner
using a shielded patch cord. This output is
unaffected by the Tuning Mute Feature.
7
Return: This input allows the signal from
outboard effects devices to be inserted before the
boost section.
8
Send: This output allows signal from the preamp
to be fed to outboard effects devices from a point
after the EQ section.
9
Headphone/Line out: When switched, this
output allows the user to send a direct
(unbalanced) line out to devices with unbalanced
inputs such as personal multitrack recorders.
This connection requires a shielded patch cord.
Unswitched, this headphone jack can be used to
monitor your playing with headphones.
MB500
MB500
D I R E C T O U T
G N D
E Q
F T . S W I T C H
GND
PRE
LIFT
POST
2
3
4
5
P A T C H B A Y
H E A D P H O N E S ( 1 )
T U N E R
R E T U R N
S E N D
F X
L I N E O U T ( 2 )
6
7
8
9
10
Headphone/Line out switch: This switch
toggles the output from headphone to line out.
11
Speaker: Power amp output to speaker cabinet.
Delivers 500w into 4 Ohm loads. Lower
impedances such as 8 Ohms or 16 Ohms and no
load are acceptable. One 4 Ohm speaker and one
8 Ohm speaker is not recommended. This unique
speaker output allows you to use a ¼" plug or the
high current, twist-lock Speakon connector.
7
1
2
5 0 0 WAT TS @ 4 O HMS
S P E A K E R
C L AS S 2 W IRING
10
11